0312 446 96 66 start@startelektronik.com.tr Pzt–Cuma 09:30–18:00 · Cmt 09:30–15:00
Kurumsal
Hizmetler & Ürünler Tüm ürünler Profesyonel Ses SistemleriProfesyonel Işık SistemleriGörüntü SistemleriGüvenlik SistemleriYangın Algılama SistemleriKonferans ve Simultane SistemleriAnons Sistemleriİnterkom SistemleriOtomasyon SistemleriUydu SistemleriMerkezi Saat SistemleriTruss SistemleriLED AydınlatmaGüneş Enerji Sistemleri
Markalar Kataloglar Referanslar E-Ticaret İletişim Teklif Al Bayi Girişi 0312 446 96 66
AMX NMX-ENC-N2312-C
AMX

NMX-ENC-N2312-C

NMX-ENC-N2312-C Kodlayıcı Kartı

Bayi fiyatı için giriş yapın
VideoDigital Video Input HDMI 2.0, DVI-D* (through adapter), Dual-Mode DisplayPort (DP++)* *These signal types are supported through a passive adapter Analog Video Input: HD-15 VGA Video Output Network video over Ethernet via RJ45 port or SFP via 1G SFP+ port, HDMI, DVI-D* *These signal types are supported through a passive adapter Formats HDMI 2.0, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP 2.2 content protection support, RGBHV DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter Progressive Input Resolutions Supports 4K30 4:2:0 and most common HD resolutions up to 1920x1200 See NMX-ENC-N2312 Installation Manual for all supported resolutions HDMI and DVI (Progressive) Pixel clock between 27 MHz - 300MHz Minimum resolution of 720x480p60 Maximum horizontal resolution of 4096 or a vertical resolution of 2160* Common acceptable resolutions include: 720x480p60 - 480p, 720x576@50, 800x600p60, 1024x768p60, 1280x720@60Hz - 720p60, 1600x1200@60Hz, 1920x1080@60Hz - 1080p60, 3840x2160(4:2:0)@30Hz - UHD30 aka 4K30, 4096x2160(4:2:0)@30Hz - DCI 4K30 Interlaced Input Resolutions Supports 1080i60 See NMX-ENC-N2312 Installation Manual for all supported resoltuions HDMI and DVI (Interlaced) 1920x1080@50Hz - 1080i50 1920x1080@60Hz - 1080i60 Note: Interlaced resolutions will be de-interlaced if scaled on the decoder; otherwise, the interlaced signal will pass through to the display Analog Input Resolutions Supports most common HD resolutions up to 1920x1200 See NMX-ENC-N2312 Installation Manual for all supported resoltuions VGA Pixel clock between 27 MHz - 165 MHz Minimum resolution of 640x480 Maximum horizontal resolution of 1920 or a vertical resolution of 1200 Common acceptable resolutions include: 640x480p60, 720x480p60 - 480p, 720x576@50,800x600p60, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz (reduced blanking) Note: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz The N2312 Encoder does not accept Composite or SVideo (YC) Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels Color Space: 4:2:0 4K30, 4:2:2 - HD LocalPlay/HostPlay: 8 playlists HostPlay: 1 image/list Note: Jumbo Frames Required Video Wall Construction: Supported within the NMX-DEC-N2322, the N2300 Series is not compatible with SVSI Windowing Processors at this time Network Video Recording: Not compatible with SVSI NVR at this time
AudioInput Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) Output Signal Types: Ethernet, Embedded audio on HDMI or DVI-D (through adapter) HDMI Audio Formats: 8ch PCM Analog Audio Format: Stereo 2-channel Analog-To-Digital Conversion: 48 kHz
Keyboard and MouseKeyboard & Mouse: Connect the Decoder to the keyboard and mouse, and an N2300 Series Encoder to the PC being controlled
LatencyLatency 17-ms at 60 fps for 1920x1080 and lower resolutions 34-ms at 30 fps for 4K30 NOTE: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Scaling adds one frame of latency (17ms at 60fps) Switching: Up to 1.5s delay, not seamless
BandwidthBandwidth: Approximately 160 Mb/s Note: Minimum bandwidth is 50 Mb/s for resolutions <= 1080p60
CommunicationsEthernet - PO 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP Ethernet - P1 1 Gbps port which accepts compatible fiber transceivers or direct attach cables, DHCP, Auto IP, and static IP HDMI: HDCP, EDID management
Ports+12V 2A: One 12 Volt DC power input PO 8-wire RJ45 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides network connection, network AV video, and power to the Encoders and Decoders PoE power P1 1-Gbps SFP+ port (SFP+ fiber transceiver or direct attach cable not included) Provides network connection and networked AV video IR IN (front panel): 3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically 39 kHz) IR receiver is necessary (not included) IR OUT 2-pin terminal Phoenix connector Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter is necessary (not included) RS232 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate AUDIO 5-pin terminal Phoenix connector which provides userselectable balanced/unbalanced input Dedicated audio input HDMI OUT: HDMI video output (passive pass-through from HDMI IN) HDMI IN: HDMI video input VGA IN: DB15 analog input
Controls and Indicators - Front PanelRESET Button Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings ID Button Recessed pushbutton Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command) POWER LED On solid (green) when operating power is supplied (via PoE or local power supply) This activity is also shown by thePWRLED on the rear panel STATUS LED On flashing (green) when there is software activity This activity is also shown by theSTATLED on the rear panel
Controls and Indicators - Rear PanelPWR LED: Same asPOWERLED described above HDMI LED: On (green) when there is a connection to a valid HDMI source but will not light for VGA source STAT LED: Same asSTATUSLED described above STRM LED: On (green) when the unit is streaming video FAN: None
EnvironmentalTemperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: Up to ~44 BTU/hr
GeneralMounting Options Regulatory Compliance: FCC, CE, and NTRL Recommended Accessories NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
FG NumbersFGN2312-CD
Fiyat sor
  • Türkiye garantili, orijinal ürün
  • Kurulum ve teknik destek
  • Anahtar teslim kurulum

Ürün açıklaması

NMX-ENC-N2312-C Kodlayıcı Kartı
N2300 Serisi KVM, PoE özellikli IP Kartı Üzerinden 4K UHD Video Kodlayıcı

NMX-ENC-N2312 Kodlayıcı ve NMX-DEC-N2322 Kod Çözücü, HDCP 2.2 desteğiyle 4096×2160’a kadar çözünürlüklere sahip 4K uygulamalarda kullanılabilen esnek, zengin özelliklere sahip ve kurulumu kolay bir Dijital Medya Dağıtımı ve Anahtarlama çözümü sağlar. Bu hareket tabanlı dalgacık codec çözümü, standart gigabit Ethernet ağları üzerinden 4K dağıtıma olanak tanıyan inanılmaz derecede düşük 200 Mb/s bant genişliğinde neredeyse algılanamayacak gecikme süresine sahip video sunar.

Herhangi bir kaynak, standart Cat5e kablo kullanılarak katman-2/katman-3 anahtarları üzerinden yönlendirilerek bir veya daha fazla ekrana gönderilebilir. NMX-ENC-N2312, giriş ölçeklendirme, çift yönlü seri, IR, yerleşik 7.1 ses ve KVMover-IP uzantısı gibi standart özellikleri içerir. Ayrıca yüksek yoğunluklu uygulamalara yönelik SVSI’nin N9206 kart kafesiyle uyumlu bir kart versiyonuyla birlikte gelir.

Özellikler

  • Tasarım Esnekliği – 1×1 kadar küçük başlayın ve yalnızca ek kodlayıcılar ve kod çözücüler ekleyerek sistemi tek kaynak ve cihaz artışlarıyla büyütün
  • SSL/TLS ve HTTPS dahil Gelişmiş Güvenlik – Kurumsal ağ güvenliği gereksinimlerini karşılar.
  • Kızılötesi (IR) – Verici bağlantısı, yalnızca IR görüntüleme cihazlarının kontrolüne olanak tanır
  • Hızlı Kurulum – Güç, IR, RS232 seri ve analog ses arayüzleri için Phoenix konektörleriyle
  • Dengeli ve Dengesiz Ses – Gömülü 7.1 dijital ses veya dengeli/dengesiz analog ses
  • HDMI Geçişi – masaüstü bilgisayar uygulamaları gibi yerel ekranla kolay kuruluma olanak tanır
  • Çoklu Bağlantı Seçenekleri – RJ-45 ve SFP ağ konektörleri ve HDMI video bağlantıları
  • KVM – KVM uygulamaları için tek USB-B
  • Yerel NetLinx – NetLinx Studio cihazı kolayca tanıyacaktır

Benzer ürünler

Projeniz için teklif alın

Listeye eklediğiniz ürünler forma otomatik aktarılır. Ekibimiz en kısa sürede size dönüş yapar.

0312 446 96 66
Pzt–Cuma 09:30–18:00 · Cmt 09:30–15:00 · Son sipariş saati: 14:00
Şafak Mah. Karanfil Cad. 854. Cadde No: 8/A
Gölbaşı / Ankara

Haritada göster
Teklif listeniz